Carb and Intake

	I need to use a VOES (Vacuum operated electrical switch) with the Crane ignition and it needs a vacuum source. Luckily S&S provides you with a boss and dimple to drill the manifold for just such a source.
	Drilling the whole just under the size of the brass tube that will be inserted.
	Tapping it home
	Manifold in place.
	The SU carb mounted in place
	The left side. I had to make the bracket for the throtle since none existed for this single cable application.
	The right side. The hard to see black support bracket that goes from the back of the carb to the engine case is another home made piece.