 |
Here I've cut the right side handlebars to weld in the inner part of the internal throttle. It's a Pat Kennedy unit |
|---|---|
 |
Here's the assembly together. Finishing this is one of the last things done on the bike. I have to the carb in place to do that. |
 |
One of the slots cut for the internal wiring. |
 |
I've pulled the wiring harness and installed the switch cover. Note the extra wire hanging loose. |
 |
This is why. The extra wire gives you a service loop so you can work on the switches if you have to. |
 |
Clutch side done . |
 |
Throttle side done. |
 |
Bars mounted up |