 |
I decided to center oil the rocker boxes. I found a neat system on line but it's not available anymore. So I researched the parts and I'm building my own. This is the case fitting. |
 |
Here's the Y hitting in place. These are slip lock fitting and these 2 are connected with a 3/4" piece of 1/8" tubing. |
 |
These are the top fittings same as the case fitting. |
 |
Lines in place at hte case. |
 |
Top lins in place. |
 |
Top lines and fittings. |
 |
Finished and in place. |
The New Stainless Steel Oil Lines |
|
 |
5/16" OD stainless steel oil lines with Swagelok fittings |
 |
All the lines in place. Connections to the Paughco oil bag |
 |
Connection to the oil cooler. |
 |
The cross over from the right side of teh frame to the left in order for the line to run back to the tank. |
 |
The oil drain set up. No more jamming funnles in there or cardboard. A simple fix. |
